AJAX Hub Plus (Ethernet, Wi-Fi, 2G, 3G)

Intelligent security control panel with Wi-Fi, 3G, and dual SIM

• Communication protocol: Jeweller (868.0−868.6 MHz)
• Operating range: up to 2,000 m (6,550 ft) in open space
• Built-in backup battery: up to 16 hours
• Mobile Apps: iOS 9.1 or later, Android 4.4 or later
• Connection: Ethernet, WiFi 2.4 GHz (802.11 b/g/n), dual SIM 2G (GSM900/DCS1800) / 3G (WCDMA 900/2100)
• Maximum number of users: 99
• Maximum number of connected devices: 150
• Hub firmware updates are free and automatic
• Jamming detection, encrypted communication channels encryption and devices authentication
• Pings every 12-300 seconds to monitor the system
• Tamper protection: available

Second-generation intelligent control panel with

- four communication channels

- a new powerful processor

- tripled RAM capacity

- doubled flash memory capacity.

The Hub Plus monitors the operation of all Ajax detectors and instantly alerts the owner and the security company (if connected).

Uses Wi-Fi, Ethernet, WCDMA and GSM to send alarms to the Central Monitoring Station and the system’s owner	Sends a notification in case of electrical power loss and operates for up to 16 hours from battery backup	Checks the functionality of detectors at least every 12 seconds

Increases stability by 4 times 🍀

The Hub Plus is equipped with a GSM module with two SIM-card slots that support 2G and 3G networks. Now you can use SIM-cards of two different communications providers without any risk of communications failures. The Hub instantly switches between 2G and 3G networks. If one SIM card does not respond, the second one is activated automatically.

Improved reliability⚡️

The Hub Plus makes it possible to use redundant Internet connection by connecting the central unit to networks of two independent communications providers: the main — via Ethernet, and the backup — via Wi-Fi. If connection of one provider fails, the hub will stay connected and continue monitoring the situation at the site.

Safe home and office automation ⚙️

Boost the potential of your security system with scenarios to actively resist the threats it detects and automate your routines. Set up a Night mode activation on schedule; turn off all the office lights automatically by arming the system; program the outdoor lights to spotlight trespassers when they trigger an outdoor motion detector; or install a sustainable anti-flood system. The system continues to execute scenarios even if the connection with Ajax Cloud is lost.

• Reactions to threats
• Planned actions
• Reactions to security mode change

 

Installation and set up 👨‍🔧

The Hub Plus has a Wi-Fi module now, so it is not necessary to lay a cable for connection to the router. The control panel is ready to operate straight out the box. It is set using the mobile application, and the detectors are connected with just one click. The device can be mounted in just a few minutes using the SmartBracket mount.

	Mounted in 5 minutes
	Placed in any room within a Wi-Fi signal range
	Mobile application for configuring and testing

 

Specifications 🤓

HUB Plus Control Panel

Wireless Security Control Panel with WiFi, 3G and dual SIM.
RF Frequency: 868.0-868.6 MHz. Jeweller Protocol.
Communication:  WiFi 2.4 GHz (802.11 b/g/n), Ethernet, dual SIM 2G (GSM900/DCS1800) / 3G (WCDMA 900/2100)
Housing material: ABS plastic.
Power supply: AC 110 ~ 250 V, 50/60 Hz.
Temp. Operation: 0 ° C ~ +50 ° C.
Dimensions: 162.7 x 162.7 x 35.9 mm.

Weight 330 g.

Hub Plus Manual